Product Details:
Payment & Shipping Terms:
|
Product Name: | High Mast Light | Application: | Parking Lot Lighting |
---|---|---|---|
Wind Speed: | 30m/s | Galvanization Thickness: | Average 86μm |
Thickness: | 1 Mm To 30 Mm | Lift Time: | 50 Years |
Highlight: | mast light tower,solar power light pole |
Outdoor Bitumen 3mm 25m High Mast Light with Round Lamp Panel for Parking Lot
Specifications:
Specification: |
20-50 meters high mast pole |
Type |
high mast pole |
Shape |
conical, hexagonal and octagonal |
Material |
Usually Q345B/A572,minimum yield strength>=345n/mm2 SS400, SS490ST52 |
Torlance of dimenstion |
-0.02 |
Design Load in Kg |
300~ 1000 Kg appliced to 50cm from the to pole |
Surface treatment |
Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required. |
Standard |
Octagonal Conical tapered column |
Length of per section |
Within 14m once forming without slip joint. |
high mast pole suit for |
city square,wharf,stadium |
Option of high mast pole |
Height from 20m to 35m |
Production Process of high mast pole |
Raw material test → Cutting →Molding or bending →Welidng (longitudinal )→Dimension verify → Flange welding →Hole drilling →Calibration →Deburr→ Galvanization or powder coating ,painting →Recalibration→ Thread →Packages |
Descripition of material:
1. Poles are made by the high-quality metal plants,which were molded into the multi-row cone- shaped vertical steel barwith hot galvanized anti-corrosion treatment
2. Light plate frame is made by high-quality stainless steel
3. Fastened bolts and nuts of stainless steel
Feature:
Special designed for stadium to provide high-power, large- area lighting for facilities; Lighthouse is devided into fixed or lift, fixed poles set up an escalator inside for i nstallation and maintenance purposes
Light source :400w-1000w sodium light
Installation:
1. high-pressure sodium lamp with external ballast and Triggers installed in light tray.
2. when replacing or repairing light and other electrical appliances, you should use special wrench to open it.
3. control box installed at the poles or the lower part of the poles
Specific explanation:
1.please install according to requirements of the company
2.make sure that the light body touches the ground during installation.
Professional Direct Buried Q345 15m Metal Utility Poles Octagonal Cross Section Shape
Hot dip galvanization electrical power pole for over headline project
Conical 3.5mm thickness electric power pole 22m height with three sections for transmission
3mm Thickness NGCP Electrical Power Pole For Electricity Distribution
Transmission Line Project Electrical Power Pole 18m 10KN For Electricity Distribution
Power Line 11m 8KN Electrical Power Pole With Galvanizing Surface Treatment
Anticorrosive 14m 500Dan Steel Power Pole For Power Transmission Electric Line
Electricity Distribution 12m Tubular Steel Power Pole For Transmission Line Project
11.8m Height Spray Paint Galvanised Steel Poles For Transmission Equipment
12m Gr 65 Material Galvanized Steel Pole Round Electric Transmission Line Poles
12m S355 S500 Steel Power Pole ASTM A123 Galvanized For Street Lighting
Multi Sided Single Circuit Galvanized Steel Pole For Electrical Line 132kv